Parkside PLKSB 1800 A1 Traduction Des Instructions D'origine page 30

GB IE
Do not use cleaning agents or sol-
vents. You may otherwise irreparably
damage the appliance.
• clean the collection bag (
a brush and, if needed, compressed air.
General maintenance
• Prior to every use, check the appliance
for obvious defects such as loose, worn
or damaged parts.
• check covers and safety devices for
damages and correct installation. Re-
place as necessary.
Removal of clogging
and blockage
Leaf material and fresh plant parts may
clog / block the device.
Cleaning the impeller:
Remove the mains plug!
There is a risk of injury from
the impeller.
1. Remove the collection bag
(see "Emptying the collection bag").
2. Check whether the shaft under the
cover (8) is blocked and if necessary,
remove the blockage.
3. Remove the screws (11) from the
machine housing (14).
4. Loosen the clasp (12).
5. Pull the motor unit (17) to the rear.
6. Carefully remove debris or obstructions
from the impeller (26).
7. Check that the impeller rotates easily
and is in perfect condition. Replace a
defective impeller at our service centre.
8. Push the motor unit (17) back into the
machine housing (14) after cleaning.
30
9. Close the clasp (12).
10. Re-attach the clasp (12) using the screw
19) using
A
• Store the device in a dry place, out of
• empty the collection bag before storing
• Space-saving storage:
Disposal and protection
of the environment
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
• hand over the device at an utilization
• Defective units returned to us will be
• Throw the cut grass on the compost.
(11).
If the screw (11) is not completely
tightened, it is not possible to ope-
rate the device.
Storage
reach of children.
it and clean the machine.
1. Remove the collection bag.
2. Loosen the quick-release locks (4)
on the handlebar (1) and on the
middle bars (5).
3. Then fold together the grip rod.
Electrical devices do not belong
with domestic waste.
location. The plastic and metal parts
employed can be separated out and
thus recycled use can be implemented.
Ask our Service-Center for details.
disposed of for free.
Do not throw it in the normal household
waste.