Dräger Alcotest 7000 Mode D'emploi page 17

4.10 Removing the funnel
● Hold the funnel using the grip areas on its sides, pull it out
of the device in an upward motion and dispose of it.
4.11 Menu items
The menu (see "Menu and context menu", page 15) contains
the following items:
4.11.1 Test results
Displays all stored results with the measuring mode,
measuring unit, date, time and sample number, including
whether the sample was taken manually or passively.
4.11.2 About screen
Displays the part number and serial number of the device and
the EC sensor.
4.11.3 Next service
Displays the time until readjustment or service is due in days.
®
4.11.4 Bluetooth
NOTICE
Risk of other devices malfunctioning.
This device includes the Bluetooth
not be used on aircraft.
► Do not select Bluetooth
The device is ready to print via Bluetooth
®
to an app via Bluetooth .
®
An active Bluetooth connection is indicated by the
®
Bluetooth symbol on the display.
®
Turns the Bluetooth feature on or off. Displays coupled and
last used printers. Searches for available printers and
removes printers.
Bluetooth on/off:
®
● Choose Bluetooth on or off with the
● Press to confirm.
Recent devices:
● Choose the desired printer using the
● Press to confirm.
®
 The Bluetooth connection to the printer is established.
The printer appears in the menu.
Scan devices:
1. Press the button.
 Available printers are searched for and displayed.
To couple and connect a printer for the first time, see
the Dräger Mobile Printer BT instructions for use.
Remove devices:
1. Choose the desired printer using the
2. Press to confirm.
3. Press the button to confirm the query.
 The printer is removed.
4.11.5 Date and time
Sets the format, date and time.
Instructions for use | Dräger Alcotest
®
feature. Bluetooth
®
on aircraft.
®
and to connect
or button.
and buttons.
and buttons.
®
7000
● Choose the date or time format using the
● Press to confirm.
● Change the digits using the
● Press to confirm.
4.11.6 Brightness
Adjusts the brightness of the display screen.
● Adjust the brightness using the
● Press to confirm.
4.11.7 Sounds
Turns the sounds on or off.
● Turn the sounds on or off using the
● Press to confirm.
4.11.8 Language
Sets the language.
● Choose the language using the
● Press to confirm.
4.11.9 Measuring unit
Sets the measuring unit.
®
The default unit setting for the measured value of breath
must
alcohol is mg/L (= milligrams of alcohol per liter of breath).
The device can be set to all common measuring units.
● Choose the measuring unit using the
● Press to confirm.
4.11.10 Automatic turning off
Sets the time until automatic shutdown.
● Set the time using the
● Press to confirm.
4.11.11 Battery type of the AA batteries (only for
AA variant)
Defines the battery type of the AA batteries that are used in
the device.
● Choose the battery type using the
● Press to confirm.
4.11.12 Software version
Displays the software version number and the associated part
number.
4.11.13 Sign in
Access to other menu items.
● Enter the four-digit PIN-1.
● Confirm the entry twice with the
Access to other menu items is protected by entering a PIN.
The default PIN is: 2 0 2 0.
Dräger recommends changing the PIN on first use.
4.11.14 Turn off
Turns off the device.
● Tap the
 The device turns off.
or
and
and
and buttons.
button.
button.
| en
Use
or button.
buttons.
buttons.
and buttons.
buttons.
and buttons.
and buttons.
17