Magmaweld monoTIG 165ip Manuel D'utilisation page 25

monoTIG 165ip / monoTIG 200ip Operation 25
3.3 Machine Features
EN
• It has thermal protection to prevent your machine from overheating and being damaged.
Thermal Protection
• If the Igbt block goes above 75 degrees, an error code will appear on the screen.
• 10 programs can be stored in the memory. You can record 10 programs between 0 - 9 .
Program Memory
• The changes will be saved. Press the P key to switch between programs.
• Lift TIG function allows TIG to be made without damaging the Tungsten tip while rubbing it.
Lift TIG
• Tolerates voltage fluctuations.
Voltage Protection
• Protection feature against false voltage and oscillating input voltage.
• After the ambient conditions have returned to normal, the machine functions will also be activated.
• Suitable for operation with generators. The kVA operating value should be determined by referring to the technical
Operation With Generators
specifications.
• Anti-Stick feature to prevent sticking.
Antistick
www.magmaweld.com USER MANUAL