SilverCrest SSTB 10 C2 Mode D'emploi Et Consignes De Sécurité page 42

Fault
The Bluetooth
connection cannot be
established.
The remote control
does not work.
NOTE
► If you are unable to resolve the problem by applying any of the aforemen-
tioned methods, please contact the Customer Service department.
Cleaning
Risk of fatal injury from electrocution!
► Remove the mains adapter from the power socket before starting to clean
the device.
Damage to the device!
► To avoid irreparable damage to the device, ensure that no moisture gets
into it during cleaning.
► Do not use caustic, abrasive or solvent-based cleaning materials.
These can damage the surfaces of the device.
♦
SSTB 10 C2
Possible cause
®
The device is not visible
in the Bluetooth
menu.
The remote control is
pointing the wrong way.
The distance between
the remote control and
the device is too great.
The batteries in the
remote control are empty.
DANGER
CAUTION
Clean the surfaces of the device with a soft, dry cloth. For stubborn dirt, use
a slightly damp cloth with a mild detergent.
Remedy
Disconnect the currently connected
playback device.
Press the
®
for 2 seconds to stop the current
Bluetooth
®
is now ready to be paired with another
Bluetooth
®
Point the remote control towards the
infrared sensor
device.
Move the remote control closer to
the device.
Replace the batteries.
/ PAIR button
connection. The device
device.
on the front of the
GB │ IE │ 35 ■