Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
This section contains important information on fault identification and rectification. The fol-
lowing table will help to identify and rectify minor faults:
Fault
The device will not
switch on.
No sound.
The Bluetooth
®
connection cannot be
established.
■
34
│
GB │ IE
Possible cause
The mains adapter is
not connected.
The socket is not supply-
ing any power.
The volume on the device
or the playback device is
set to minimum.
Playback has not been
started on the playback
device.
You have selected the
incorrect operating
mode.
Bluetooth
®
is not
activated on the play-
back device.
It is possible that not all
of Bluetooth
®
devices
are compatible.
The playback device
is not paired with the
device.
The distance between
the device and the
playback device is
too great.
Bluetooth
®
operation
is deactivated on the
speaker.
Remedy
Connect the mains adapter correctly.
Check the house's mains fuse.
Increase the volume on the device or
on the playback device.
Start playback on the playback
device.
Check whether the correct operating
mode (AUX or Bluetooth
been set.
Switch on Bluetooth
playback device. Please refer to its
operating instructions for more infor-
mation.
Check the settings on your
Bluetooth
®
device.
Pair the devices again (see chapter
Pairing the device with a
Bluetooth
®
playback device).
Ensure that the device is no more than
10 metres away from the playback
device.
Press the
button on the remote
control or press the
on the device to switch on the
ton
Bluetooth
®
function.
®
) has
®
on your
/ FUNC. but-
SSTB 10 C2
Publicité
