Air Purifier Airpal Go 300/600 H General Operation; General; Main Parts - Helios AirPal Go 300H Notice De Montage Et D'utilisation

Installation and Operating Instructions
EN
CHAPTER 4
CONSTRUCTION CHA-
RACTERISTICS AND
COMPONENTS INCLU-
DED
Air purifier AirPal Go 300/600 H
3�2 Air purifier AirPal Go 300/600 H general operation
The air purifier AirPal Go 300/600 H has a simple and intuitive operation to facilitate users and installers operation and
maintenance of the unit.
In general, the air purifier AirPal Go 300/600 H intakes contaminated air from the two upper sides of the unit. Once the
air is cleaned and purified through the filters, it is delivered to the bottom of the unit and returned to the room.(see Fig.1)
Fig�1
To operate the air purifier AirPal Go 300/600 H it first needs to be connected to the electrical supply (generally 230V /
50Hz but it can also operate at 60Hz).
The air purifier AirPal Go 300/600 H is operated by means on the onboard control panel that allows set up and control
of the following parameters:
1. On/Off of the air Purifier.
2. Time programming - operation by timer.
3. Power setting, 0 being the lowest and 100 the highest.
4. Schedule control for night mode optimization and thus favoring low energy consumption when the interior spaces
are empty.
5. Clogged filter alarm and maintenance indication.
4�1 General
The air purifier AirPal Go 300/600 H is an air purification unit in a soundproofed galvanized steel structure for corrosion
resistance.
1. AirPal Go 300 H suitable for spaces up to 25* m² (2.5 m high), max delivery 300 m³/h.
2. AirPal Go 600 H suitable for spaces up to 50* m² (2.5 m high), max delivery 600 m³/h
(* with 4-way air exchange)
4�2 Main parts
In the following diagram (Fig.2) is shown the air purifier AirPal Go 300/600 H and their placement within the unit:
Fig�2
INTEGRATED CONTROL
4