Breitling CLASSIC AVI CHRONOGRAPH 42 Mode D'emploi page 10

PREPARATION FOR USE
WINDING – TIME-SETTING
1. Unscrew the water-resistant crown anti-clockwise.
Wind the watch through approximately 40 clockwise turns
of the crown.
2. Pull the crown out to position 2. Then adjust the hour and
minute.
3. Push the crown back to position 1. Press it gently, turning it
gently clockwise, then tighten it again until you feel some
resistance. Do not force!
14
USING THE CHRONOGRAPH
I. M
EASURING A SINGLE SHORT TIME
1. Press pushpiece A to start the chronograph.
Hand 3 shows the measurement in seconds.
2. Stop the measurement by pressing pushpiece A once more.
The measurement is made in hours (totalizer 1), minutes
(totalizer 2), seconds (hand 3).
3. Reset the chronograph to zero by pressing pushpiece B.
15 15