SilverCrest SLSN 3 A1 Mode D'emploi Et Consignes De Sécurité page 13

7. Before initial use
7.1 Inserting/changing the batteries
•
Switch the lady shaver off using the ON/OFF switch (7).
•
Open the battery compartment by pulling the battery compartment cover (9) downwards.
•
Where necessary, remove any batteries that are already inserted.
•
Insert two new LR6/Mignon/AA batteries. Please note the labels on the batteries and in the battery
compartment.
•
Place the battery compartment cover (9) back onto the battery compartment and push upwards as far
as it will go.
•
The lady shaver is now ready for use.



8. Initial use
When shaving sensitive areas of the body such as your bikini line or arm pits, the skin must
always be taut in order to avoid injury.
If you have sensitive skin or are prone to allergic reactions on your skin, we recommend
performing a patch test on a small, hidden section of the skin first.
8.1 Travel safety lock
The travel safety lock (8) prevents the lady shaver from accidentally switching on.
To switch on the lady shaver, slide the ON/OFF switch (7) towards the shaving foil (2) while pressing the
travel safety lock (8). The lady shaver will now start.
Use 1.5 V LR6/Mignon/AA batteries only.
Always change both batteries at the same time.
Ensure the correct polarity when inserting the batteries. When doing so,
observe the labels on the batteries and in the battery compartment.
SilverCrest SLSN 3 A1
English - 11