mundoclima MUCSR-H14 Manuel D'installation Et De L'utilisateur page 82

Press this button to enter the energy efficient mode in a sequence of
following:
ECO
Under cooling mode, press this button, the remote controller will adjust the temperature
automatically to 24 C/75 F, fan speed of Auto to save energy (only when the set temperature
O
is less than 24 C/75 F). If the set temperature is above 24 C/75 F, press the ECO button, O
O
the fan speed will change to Auto, the set temperature will remain unchanged.
NOTE:
Pressing the ECO button, or modifying the mode or adjusting the set temperature to less
than 24 C/75 F will stop ECO operation. O
O
Under ECO operation, the set tmeperature should be 24 C/75 F or above, it may result in
insufficient cooling. If you feel uncomfortable, just press the ECO button again to stop it.
GEAR(75%) GEAR(50%)
O
Previous setting mode
O
O
O
O
82
ECO......