mundoclima MUCSR-H14 Manuel D'installation Et De L'utilisateur page 46

WARNING
19. If the supply cord is damaged, it must be replaced by the manufacturer,its service agent or similarly qualified
persons in order to avoid a hazard.
20. The appliance shall be installed in accordance with national wiring regulations.
21. An all-pole disconnection device which has at least 3mm clearances in all poles, and have a leakage current
that may exceed 10mA,the residual current device (RCD) having a rated residual operating current not
exceeding 30mA,and disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.
22. The appliance disconnection must be incorporated with an all-pole disconnection device in the fixed wiring in
accordance with the wiring rules.
23. Any person who is involved with working on or breaking into a refrigerant circuit should hold a current valid
certificate from an industry-accredited assessment authority, which authorises their competence to handle
refrigerants safely in accordance with an industry recognised assessment specification.
24. Servicing shall only be performed as recommended by the equipment manufacturer.
25. Maintenance and repair requiring the assistance of other skilled personnel shall be carried out under the
supervision of the person competent in the use of flammable refrigerants.
26. The appliance shall be stored so as to prevent mechanical damage from occurring.
27. Keep ventilation openings clear of obstruction.
28. Do not turn on the power until all work has been completed.
29. When moving or relocating the air conditioner, consult experienced service technicians for disconnection
and reinstallation of the unit
30. In certain functional environments, such as kitchens, server rooms, etc., the use of specially designed
air-conditioning units is highly recommended.
31. Removal of the plug has to be such that an operator can check from any of the points to which he has
access that the plug remains removed.
32. If this is not possible, due to the construction of the appliance or its installation, a disconnection with a
locking system in the isolated position shall be provided.
CLEANING AND MAINTENANCE WARNINGS
1. Turn ou the device and pull the plug before cleaning. Failure to do so can cause electrical shock.
2. Do not clean the air conditioner with excessive amounts of water.
3. Do not clean the air conditioner with combustible cleaning agents. Combustible cleaning agents can cause
deformation. Turn ou the device and pull the plug before cleaning. Failure to do so can cause electrical shock.
ELECTRICAL WARNINGS
1. Only use the specified power cord. If the power cord is damaged, it must be replaced by the manufacturer or
certified service agent.
2. Keep power plug clean. Remove any dust or grime that accumulates on or around the plug. Dirty plugs can
cause fire or electric shock.
3. Do not pull power cord to unplug unit. Hold the plug firmly and pull it from the outlet. Pulling directly on the
cord can damage it, which can lead to fire or electric shock.
4. Do not use an extension cord, manually extend the power cord, or connect other appliances to the same
outlet as the air conditioner. Poor electrical connections, poor insulation, and insufficient voltage can cause fire.
NOTE: For the product air-to-air air conditioners and heat pumps which above 12 kW cooling power output, please
see the information requirements from Appendix .
46