PLAYTIVE 359810 2101 Notice D'utilisation page 13

Congratulations!
You have chosen to purchase a high-quality
product. Familiarise yourself with the product
before using it for the first time.
Read the following instructions for
use carefully.
Use the product only as described and only
for the given areas of application. Store these
instructions for use carefully. When passing the
product on to third parties, please also hand
over all accompanying documents.
Delivery contents (figure A)
1 x zoo enclosure, unassembled (1-16)
1 x accessory (17-22)
9 x screw (23)
1 x instructions for use
Technical data
Date of manufacture (month/year):
07/2021
Delta-Sport Handelskontor GmbH
hereby declares that this product
meets the following basic require-
ments, as well as other important regulations:
2009/48/EC – Toy Safety Directive
UK Conformity Assessed
Use according to guidelines
This product is a toy for private use and for
children aged 3 years and above.
Safety instructions
• Warning. Not suitable for children under 36
months. Choking hazard. Small parts.
• Children may play with this product only
under adult supervision.
• Adult assembly required. Ensure that the
product and all components are not given to
children until after assembly.
• Warning. Neither the packaging/mounting
materials nor the 'SUPER DRY' pouch (desic-
cant) are a constituent part of the toy and they
must be removed before the product is given
to children to play with.
• Warning. Desiccant contains calcium chloride
(CAS 10043-52-4). Keep out of reach of
children.
• Check the product for damage and wear be-
fore each use. The product may only be used
in good order and condition!
Assembly
Assemble the product as follows:
1. To assemble the smaller enclosure connect the
crossbar (4) and the back wall (6) to the side
walls (2), (3) with the aid of the screws (23)
(fig. B).
2. Insert the part (5) and put the roof (1) on the
enclosure (fig. B).
3. Assemble the larger enclosure as shown in
fig. C.
4. To assemble the feed trough slide the part
(15) from below into the side sections (13)
(fig. D).
5. Insert the straw tray (16) sideways into the
side sections (13) and put the roof (14) on
(fig. D).
6. Fit the gate (18a) onto the base (18b) (fig. E).
GB 13