mundoclima MUPR-H14 Serie Manuel D'installation Et L'utilisauter page 69

Not all the functions are available for the air
conditioner, please check the indoor display
and remote control of the unit you purchased.
Other Features
Auto-Restart
•
If the unit loses power, it will automatically
restart with the prior settings once power has
been restored.
Anti-mildew
•
When turning off the unit from COOL, AUTO
(COOL), or DRY modes, the air conditioner will
continue operate at very low power to dry up
condensed water and prevent mildew growth.
WI-FI Control (optional)
•
WI-FI control allows you to control your air
conditioner using your mobile phone and a
wireless connection.
For the USB device access, replacement,
maintenance operations must be carried
out by professional staff.
Louver Angle Memory
•
When turning on your unit, the louver will
automatically resume its former angle.
Active Clean function
•
-- The Active Clean Technology washes away
dust, mold, and grease that may cause odors
when it adheres to the heat exchanger by
automatically freezing and then rapidly thawing
the frost. A "pi-pi" sound will be heard.
The Active clean operation is used to produce
more condensed water to improve the cleaning
effect, and the cold air will blow out. After
cleaning, the internal wind wheel then keeps
operating with hot air to blow-dry the evaporator,
thus preventing the growth of mold and keeping
the inside clean.
-- When this function is turned on, the indoor
unit display window appears "CL " , after 20
to 45 minutes, the unit will turn off automatically
and cancel Active Clean function.
Refrigerant Leakage Detection
•
The indoor unit will automatically display "EL0C"
when it detects refrigerant leakage.
Sleep Operation
•
The SLEEP function is used to decrease
energy use while you sleep (and don't
need the same temperature settings to
stay comfortable). This function can only
be activated via remote control. And the
Sleep function is not available in FAN or
DRY mode.
When in COOL mode, the unit will increase
the temperature by 1°C (2°F) after 1 hour,
and will increase an additional 1°C (2°F) after
another hour.
When in HEAT mode, the unit will decrease
the temperature by 1°C (2°F) after 1 hour,
and will decrease an additional 1°C (2°F)
after another hour.
The sleep feature will stop after 8 hours and
the system will keep running with final situation.
SLEEP Operation
Cool mode(+1 C/2 F) per hour
for the first two hours
Set
temperature
1hr
Heat mode( -1 C/2 F) per hour
for the first two hours
Saving energy during sleep
NOTE:
For multi-split air condtioners, the following
functions are not available:
Active clean function, Silence feature,
Refrigerant leakage detection function
and Eco feature.
69
Keep
running
1hr