Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
Installation
WARNING!
Before installing the appliance,
carefully read the safety information in this
booklet.
Installation checklist
Door
Door seals completely to cabinet on all sides
Door is level
Levelling
Refrigerator is level
Electrical power
Wait 4 hours
House power turned on
Refrigerator plugged in
Final checks
Packing materials removed
Refrigerator temperature set
Positioning
• Follow the separate Assembly Instructions to
install this appliance.
• Install this appliance at a location where the
ambient temperature corresponds to the
climate class indicated on the rating plate of the
appliance. This ensures the correct operation of
the appliance. Explanation of climate classes is as
follows:
Climate class
Ambient temperature range
SN
+10°C to +32°C
N
+16°C to +32°C
ST
+16°C to +38°C
T
+16°C to +43°C
- "SN" indicates that this refrigerating appliance
is intended to be used at ambient temperatures
ranging from 10°C to 32°C.
- "N" indicates that this refrigerating appliance is
intended to be used at ambient temperatures
ranging from 16°C to 32°C.
- "ST" indicates that this refrigerating appliance is
intended to be used at ambient temperatures
ranging from 16°C to 38°C.
- "T" indicates that this refrigerating appliance is
intended to be used at ambient temperatures
ranging from 16°C to 43°C.
For some models of appliances, some functional
problems can occur when they operate outside
the specified temperature ranges. The correct
operation can only be guaranteed within the
specified temperature ranges.
If you have any doubts regarding installation,
please turn to the vendor, our customer service or
the nearest Authorised Service Centre.
Location
To ensure best performance, install the appliance well
away from sources of heat such as radiators, boilers,
and direct sunlight. Make sure that air can circulate
freely around the back of the cabinet.
Levelling the appliance
If the appliance tilts in some way, adjust the two feet
at the front of the appliance to level the appliance.
Refer to the separate Assembly Instructions for
detailed instructions.
1. Disconnect the mains plug of the appliance from
the power socket.
2. Turn the foot clockwise to raise the appliance. Turn
the foot anticlockwise to lower the appliance.
Cleaning the appliance
Before using the appliance for the first time, clean the
appliance to remove the typical smell of a brand-new
product.
1. Make sure the appliance is disconnected from the
power supply.
2. Wipe the interior with a soft, moistened cloth.
3. Wash the internal accessories with lukewarm
water and some neutral soap, then dry thoroughly.
CAUTION!
Do not use abrasive, chloride or acidic cleaning
agents or solvents.
• Do not use scouring or abrasive sponges. The
metallic surfaces may corrode.
• Never clean the accessories using a dishwasher.
They may become deformed.
Electrical connection
CAUTION!
Any electrical work required to
install this appliance should be carried out by a
qualified electrician or competent person.
WARNING!
This appliance must be earthed.
Failure to follow these instructions can result in
death, fire or electrical shock.
The manufacturer declines any liability should these
safety measures not be observed. This appliance
complies with the E.E.C. Directives.
10
Publicité
