Cleco CellClutch CLBA Serie Manuel D'utilisation page 16

1
EN
Problem
10 Disposal
Components and auxiliary materials of the product pose risks to the health and the environment. The tool contains com-
ponents that can be recycled as well as components that must be specially disposed of.
► Separate the components of the packing and segregate the different materials before disposing of them.
► Follow the locally applicable regulations.
Observe generally valid disposal guidelines such as, in Germany, the Electrical and Electronic Equipment
Act (ElektroG) and the Battery Act (BattG).
► Dispose of waste battery packs.
► Return the battery to your company collection facility or to Sales & Service Center.
► Do not dispose of the batterie packs in the household waste or throw them into fire or water.
16
Possible cause
Tool temperature is too high.
Battery voltage is too low.
Warning that the next mainte-
nance is due.
P2547BA | REV I / 2024-06
Measure
► Allow the tool to cool down. The current
rundown can be terminated, but a new
one cannot be started.
► Change battery.
► Send the tool to a Sales & Service Center
for maintenance.
Apex Tool Group