Cleco CellClutch CLBA Serie Manuel D'utilisation page 11

Legend
Symbol Explanation
Green LED lights up
Blue LED lights up
Red LED lights up
White LED lights up
Buzzer sound is heard
▬
Break
6 Before Initial Operation
Charging Battery Pack
Battery pack is supplied partly charged and must be
charged completely being used for the first time.
► See Original Instructions of Milwaukee charger.
► Do not use any other battery packs / chargers than
the following:
Charger 18 V
Order No. Country
T50-1000499 North America
T50-1000506 Europe
T50-1000507 Brazil
T50-1000543 Argentina
T50-1000544 United Kingdom
T50-1000545 China
T50-1000546 Japan
T50-1000500 North America
T50-1000508 Europe
T50-1000547 United Kingdom
Setting the torque
Caution
Winding hazard
Unintentional pressing of the start trigger can
cause the drive to turn and cause serious fin-
ger injuries.
► Disconnect the tool from the power sup-
ply when converting work.
Apex Tool Group
Fig. 1-2: Clutch Adjustment Tool Order no. T50-1001619
1
2
3
► Using the clutch adjustment tool provided:
•
turn clockwise for maximum torque.
•
turn counterclockwise for minimum torque.
1-Bay
Fig. 1-3: Setting the torque
6-Bay
7
Implement a comprehensive safety maintenance program
to provide regular inspection for all phases of tool opera-
tion and power supply.
P2547BA | REV I / 2024-06
Square opening for square drive outputs
Hex drive for rotating hex outputs
Screwdriver end for cluch adjustment
Recommendation: For best results, start from
minimum torque and adjust in the maximum di-
rection until desired torque is achieved.
Maintenance
Note
Loss of warranty
Repairs are only permitted by Apex Tool
Group authorized personnel. If the tool is
opened, the warranty is voided.
► If repair is required send the complete
tool to Sales & Service Center!
1
EN
11