2
Component names and supplied parts
The following parts are included in the box.
Parts name
Remote controller (top case)
Remote controller (bottom case)
Roundhead cross slot screws M4×30
Wood screw 4.1×16
(for direct wall installation)
Simple Manual
CD-ROM (this manual)
Instruction Book and Installation
Manual
*3 ISO metric screw thread
*4 Remote controller cable is not included.
3
Field-supplied parts/Required tools
(1) Field-supplied parts
The following parts are field-supplied parts.
Parts name
Double switch box or 86type
switch box
Thin metal conduit
Lock nut and bushing
Cable cover
Putty
Molly anchor
Remote controller cable
(Use a 0.3 mm² (AWG22) 2-core
sheathed cable.)
(2) Field-supplied tools
• Flat-tip screwdriver (Width: 3 - 5 mm (1/8 - 13/64 inch))
• Nipper
• Miscellaneous tools
Qty.
Appearance
1
Right figure *1
1
Right figure *2
2
*3
2
*3
2
1
Qty.
1
Not required for direct wall installation
Necessary
Necessary
Necessary
Required for routing remote controller cable along a wall
Reasonable
Necessary
Necessary
– 5 –
Top case *1
Bottom case *2
Notes