Publicité
Les langues disponibles
Les langues disponibles
(5) Function setting (M/P-series)
Make the settings for the indoor unit functions via the remote controller as
necessary.
Select "Function setting" from the Settings menu to bring up the Function
setting screen.
[Button operation]
1 Set the indoor unit refrigerant addresses and unit numbers with the
then press the
SELECT/HOLD
2 When data collection from the indoor units is completed, the current
settings appears highlighted. Non-highlighted items indicate that no
function settings are made. Screen appearance varies depending on
the "Unit No." setting.
The display format and the setting method vary with indoor units.
Pattern 1
3 Use the
or
F1
F2
number, and change the setting number with the
4 When the settings are completed, press the
send the setting data from the remote controller to the indoor units.
5 When the transmission is successfully completed, the screen will return
to the Function setting screen.
Pattern 2
3 Toggle through the pages with the
4 Select the mode number with the
SELECT/HOLD
button.
5 Select the setting number with the
Setting range for modes 1 through 28: 1 through 3
Setting range for modes 31 through 66: 1 through 15
6 When the settings are completed, press the
send the setting data from the remote controller to the indoor units.
7 When the transmission is successfully completed, the screen will return
to the Function setting screen.
button to confirm the current setting.
button to move the cursor to select the mode
or
F3
F4
or
F1
F2
or
F1
– 24 –
or
button.
F3
F4
SELECT/HOLD
button to
button.
button, and then press the
button.
F2
SELECT/HOLD
button to
through
buttons, and
F1
F4
Common items
Individual items
(Unit No. 1 through 4)
Publicité
