[5] Backlight
The backlight lighting-up time can be set.
[Button operation]
Move the cursor to "Backlight" from the display details setting screen, and select the desired time
(5/10/20/30/60 seconds) with the
Note: This setting is effective on the Status display and the Main display.
[6] LED lighting
The LED lighting can be set to either "Yes" (On) or "No" (Off). (The
factory setting is "Yes".)
When "No" is selected, the LED will not light up even during the normal
operation.
(4) Contrast•Brightness
[Button operation]
Select the desired brightness for the remote controller LCD with the
and
F2
buttons.
Adjust the contrast with the
indicated with a triangle.
Note: Adjust the contrast and brightness to improve viewing in different lighting
conditions or installation locations. This setting can not improve viewing
from all directions.
(5) Language selection
[Button operation]
Move the cursor to the language you desire with the
buttons.
Press the
SELECT/HOLD
button. (The factory setting is "30" seconds.)
F4
or
button. The current level is
F3
F4
button to save the setting.
– 20 –
F1
through
F1
F4