SYMBOL
MEANING
SAFETY ALERT SYMBOL:
Indicates danger, warning, or requirement of caution. May be used in con-
junction with other symbols or pictographs.
WARNING – READ OPERATOR'S MANUAL
Read the Operator's Manual and follow all warnings and safety instructions.
Failure to do so can result in serious injury to the operator and/or bystanders.
WEAR EYE AND HEARING PROTECTION
WARNING: Thrown objects and loud noise can cause severe eye injury and
hearing loss. Wear eye protection and ear protection equipment when operat-
ing this unit.
PRIMER
Push primer bulb, fully and slowly, ten times.
UNLEADED PETROL
Always use clean, fresh unleaded petrol.
OIL
Refer to Operator's Manual for the proper type of oil.
HOT SURFACE WARNING
Do not touch a hot muffler or cylinder. Danger of burns! These parts get
extremely hot from operation. Even when the unit is turned off they remain hot
for a certain time.
Keep bystanders away.
Objects can be thrown from blower. Do not operate unit without proper
attachments and guards in place; especially children and pets should be kept
in a distance of at least 15 meters (50 ft) from the operating area.
Danger from rotating machine parts!
Never reach into openings in the unit!
Guards designed to be opened shall have a sign warning of the relevant
hazard visible on the machine both when the guard is closed and when it is
opened or removed.
CHOKE CONTROL
A. FULL choke position.
B. PARTIAL choke position.
C. RUN position.
GB-5