Publicité
Les langues disponibles
Les langues disponibles
Recalling the last alert
The receiver stores an incoming alert for 3 minutes. During this time, you
can call it up again by pressing the function button - the last alert received
is then displayed by the event icons.
Warnings and safety instructions
This chapter lists further important information for safe handling and other
conditions for operation.
Safety instructions
-
This appliance is designed for use with 230 V AC / 50 Hz power outlets only.
-
This device can not convey an alert in the event of a power failure. When equipping your
alerting system, also use Lisa-Signolux receivers that have an emergency power supply,
e.g. Receiver T, receiver alarm clock, Receiver S.
Information on product safety
Please observe these instructions to avoid damage to the unit and possible invalidation of the
warranty.
-
The device is designed for use in living areas. The unit must not be exposed to direct sun-
light for long periods of time and must also be protected from excessive heat, moisture or
strong mechanical shocks.
This appliance is not suitable for outdoor use. The appliance must not get damp or wet.
-
Do not use this device in extremely bright locations, such as sunlit window sills, as there is a
-
risk of not recognising the flash light.
-
The appliance must not be dismantled as there is a risk of electric shock. Opening and
modifying the appliance will immediately invalidate the warranty. Only use accessories from
Humantechnik.
-
Only use Lisa-Signolux system devices where electronic devices are permitted. When used
in aeroplanes, it is essential to obtain the prior consent of the flight crew.
Strong interference signals from external devices can impair or completely prevent the func-
-
tion. Do not place potentially interfering devices such as screens and mobile phones closer
than 30 cm to Lisa-Signolux devices and, if necessary, their cabling, as important event
messages such as fire warnings may be prevented.
English 22
Publicité
