HumanTechnik lisa signolux Receiver T Mode D'emploi page 16

Setting the volume
Use the rotating volume control (7) to set the volume of the alerting tone.
Safety warning:
This device can generate sounds of up to 90 dB! Protect your sense of hearing! Please set a
low volume to begin with and only then adjust it to the desired volume.
Event icons
The icons symbolize:
Doorbell 1
Doorbell 2
Telephone
Person call Colour: Yellow
Automatic pairing
Lisa-Signolux devices can be used together immediately and without prior pairing when de-
livered.
The displayed icon depends on the type of transmitter. This information can be found in the
user manual of the according transmitter.
Optional manual pairing
Note 1:
If a transmitter is to be displayed with an event icon of your own choice, this can be done as
described in the chapter „Linking transmitter alerts with event icons".
However, this causes the receiver to lose the automatic pairing function and all transmitters
previously shown on the receiver must be individually paired.
Note 2:
Should there be repeated false alerts when using the preset transmitter indication, this may
hint at a neighbouring Lisa-Signolux installation causing interference. In this case, the problem
can be solved by individually pairing all transmitter and receiver units within the setup (see
„Linking transmitter alerts with event icons").
16 English
Colour: Green
Colour: Green
Colour: Orange
Baby Colour: White
Fire alarm Colour: Red
Flood alarm Colour: Blue
Alarm Colour: Red