Publicité
Les langues disponibles
Les langues disponibles
PROGRAMMING INSTRUCTIONS
FRONTAL PANEL DESCRIPTION
GENERAL FUNCTIONS OF THE PUMP
- 4 LANGUAGES MENU: ITALIAN, ENGLISH, FRENCH, SPANISH
- 3 POSSIBLE TYPES OF FUNCTIONING: Manual, mA Input, Pulse (i.e pulses receved from watermeter)
- START UP DELAY
- DEFAULT PARAMETER RESTORING
- LEVEL CONTROL
- STOP DOSING (STAND_BY)
DEFAULT SETTINGS
Default functioning : ppM.
Following settings:
•
ppM =0.4
•
conc %= 5%
•
L/i = 1
•
Cc/inje= 0.20cc
DEFAULT SETTINGS RESTORE
Rev 3.0
1. Display LCD 8 x 2 backlight
2. Green Led:
•
•
3. Red Led: indicates the injections.
4. CAL button:
•
•
5/6. – e + button:
•
•
7. ESC/SBY button:
•
•
Other parameters:
•
Manual: Freq. 80%
•
mA Min: 4.0mA
•
Imp.Min: 0%
•
Dos Min: No
•
mA Max: 20.0mA
•
Imp. Max: 80%
•
Dos Max: Yes
•
n=1
•
START UP DELAY: 0 sec
Push and quickly release CAL button and then pressing + and
– buttons select "Restore Enter".
Push CAL to confirm the choice. The pump goes back in
measure restoring in memory.
the default settings and calibrations parameters.
Cod. 00.009.307
fix = PUMP ON
blinking = PUMP IN ALARM
allows to enter in programming.
saves the changes.
allows to navigate through the menu.
Modify the parameters values.
puts the pump in stand_by mode.
allows to exit the menu.
42
Publicité
