Olimpia splendid OS-SEPHH09EI Mode D'emploi Et D'entretien page 97

LC 05
LC 03
LC 02
LC 01
LH 00
LC 06
LH 07
NA
FOR EACH ERROR:
Switch off the unit and wait 2 minutes before restarting it, if the problem persists, please contact the
assistance centre.
5.2 - OTHER ERROR
The display board may show a garbled code or a code undefined by the service manual. Ensure that this
code is not a temperature reading.
test the unit using the remote control.
- if the unit does not respond to the remote, the indoor PCB requires replacement.
- if the unit responds, the display board requires replacement.
frequency limit caused by voltage
frequency limit caused by current
frequency limit caused by tP
frequency limit caused by t3
frequency limit caused by t2
frequency limit caused by PfC
frequency limit caused by remote controller
no malfunction or pretecion
EN - 41
PHENIX E INVERTER