CAUTION! MATERIAL DAMAGE!
Do not use the appliance in direct sunlight or near any
►
heatgenerating appliances.
NEVER fill the blender with boiling liquids or other foods!
►
Allow these to cool to a lukewarm temperature.
NEVER operate the appliance when it is empty, i.e. without
►
ingredients in the blender attachment.
Setting up
Once all components have been cleaned as described in the section "Cleaning":
■
Position the appliance so that, ...
–
that the mains cable passes through the recess at the rear of the
appliance,
–
the power plug is immediately accessible, so that it can be quickly
withdrawn in the event of danger,
–
that it is stable and not liable to slip, and so that the sucker feet can attach
firmly and the appliance cannot tip over due to vibration,
–
that the mains cable is not in the working area and thus does not present
a risk of being inadvertently snagged and tipping the appliance over.
Operation
WARNING!
The motor switches off automatically as soon as the blender 3 is removed
►
from the motor block 6 or the lid 2 is opened. In such cases it may be
easy to forget that the machine is still switched on. The motor will then start
unexpectedly as soon as the blender attachment 3 is fitted or the lid 2 is
closed again:
Therefore:
–
Do not insert the power plug into the wall socket until the blender 3 is
filled and mounted with its lid fitted and closed.
–
Before fitting the blender, always check to see that the appliance is
switched off or that the power plug has been removed.
–
Switch the appliance off first, pull the plug out and wait until the motor has
come to a standstill before removing the blender 3 or opening the lid 2.
│
GB │ IE
■
6
SSMC 600 B1