SilverCrest 379528 2110 Guide Abrégé page 10

Fitting and filling the blender
1) Remove the blender 3 from the motor block 6 in a vertical, upward motion.
2) Remove the lid 2 by rotating it anticlockwise towards position
until you can pull it upwards.
3) Fill the blender 3 to at least to the lowest line of the scale 8 and at most to
the MAX mark. For optimum results, we recommend the following maximum
filling quantities:
Food
Liquids
Yoghurt-based drinks
Milkshakes/
smoothies
Pancake mix
Baby food
Mayonnaise
Vegetable soup
Ice cubes
4) Press the lid 2 firmly down onto the blender 3. Close the lid 2 by turning
it clockwise to position
the pouring spout on the blender 3 is closed. The motor cannot start until
the lid 2 is fitted flush.
Fig. 1
SSMC 600 B1
Max. Recom-
filling mended
quantity level
1750 ml 1‒3
1250 ml 2‒5
1250 ml 2‒5
1250 ml 3‒5
750 ml 5
2 eggs
3‒5
250 ml oil
1500 ml 3‒5
250 ml
(approx.
P
14‒15
pieces)
until it audibly engages (see Fig. 2). Ensure that
Fig. 2
(see Fig 1)
Recommended
processing time
60 sec.
90 sec.
60‒90 sec.
90 sec.
3 min.
90‒120 sec.
3 min.
12x
GB │ IE │
7 ■