Publicité
Les langues disponibles
Les langues disponibles
NOTES ON STARTING THE ENGINE
1.Take a careful look around to make sure that no obstacles exist within a perimeter of 15m or less around brush cutter.
2.Place the body of the brush cutter onto the ground in a flat clear area and hold it filmly,in place so as to ensure that
neither the cutter parts nor the throttle come into contact with any obstacles when the engine starts up.
3.Place the throttle into the idling position when starting the engine.
KICKBACK SAFETY PRECAUTIONS
1.Before beginning work, clear your working area and remove grasses around the obstacles.
2.When using your brush cutter, do not grip other parts except the handles.
3.When using your brush cutter, never take your eyes off. if you need to, place the throttle into the idling position.
4.When using your brush cutter, do not let the unit get closer to your feet nor raise the unit above your waist.
NOTES ON TRANSPORTATION
(a). Make sure the appropriate blade cover is in place.(if blade is equipped)
OPERATION SAFETY PRECAUTIONS
(a).Grip the handles of the brush cutter firmly with both hands. If you suspend the work, place the throttle into the idling
position.
(b).Always be sure to maintain a steady,even posture while working.
(c). Maintain the speed of the engine at the level required to perform cutting work., and never raise the speed of the
engine above the level necessary.
d. Never touch the spark plug or plug cord while the engine is in operation. Doing so may result in being subjected to an
electrical shock.
e. Never touch the muffler, spark plug, or other metallic parts of the engine while the engine is in operation or
immediately after shutting down the engine. Doing so may result in serious burns.
f. .when you finish cutting in one location and wish to continue work in another spot, turn off the engine and turn the unit
as the cutting parts faces away from your body.
MAINTENANCE SAFETY PRECAUTION
a Under no circumstances should you ever take apart the brush cutter or alter it in any way. Doing so mingt result in the
brush cutter becoming damaged during operation or the brush cutter becoming unable to operate properly.
b. . Always be sure to turn off the engine before performing any maintenance or checking procedures.
c When sharpening, removing, or reattaching the blade, be sure to wear thick, sturdy gloves and use only proper tools
and equipment to prevent injury.
72
Publicité
