Portez des protecteurs antibruit pour
vous protéger les oreilles contre les
"bruits d'échappement
et un casque.
Portez également des vêtements légers
mals non làches. Boutonnez ou roulez
vos manches. Ne portez pas de cravate.
(1) Casque
(2) Protecteurs antibruit
i est dangereux de travailler trop vite ou
de forcer l'outil. Tenez celui-ci avec soin.
Ne vous
en servez pas lorsque vous
vous trouvez sous l'influence de l'alcool,
de médicaments ou tout autre stupéfiant.
Règles générales de maniement:
1. Supposez toujours que l'outil contient des clous.
2. Ne pointez pas l'outil vers vous-même ou quiconque, qu'il
contienne des clous ou non.
3. Ne mettez pas l'outil en marche tant qu'il n'est pas solide-
ment appuyé contre la plèce.
4. Respectez dans l'outil votre instrument de travall.
5. Pas de jeux de mainsi
6. Ne tenez ou ne transportez pas l'outil avec le doigt sur la
gâchette.
7.Ne chargez pas l'outil lorsque l'une des touches de com-
Mande est activée.
Un outil qui ne fonctionne pas correcte-
ment ne devra pas être utilisé.
4
Wear. hearing protection to protect your
ears against exhaust noise and head pro-
tection. Also wear. light but not loose
clothing. Sleeves should be buttoned or
rolled up. No necktie should be worn.
(1) Head protection
(2) Hearing protection
Rushing the Job or forcing the tool is
dangerous. Handle the tool carefully. Do
not operate when under the influence of
alcohol, drugs or the like.
General Too! Handling Guidelines:
1. Always assume that the tool contains fasteners.
2. Do not point the tool toward yourself or anyone whether it
contains fasteners or not.
3.Do not actuate the tool unless the tool Is placed firmly
against the workpiece.
4. Respect the tool as a working implement.
5. No horseplay.
6. Do not hold or carry the too! with a finger on the trigger.
7. Do not load the tool with fasteners when any one of the oper-
ating controls is activated.
8. Do not operate the tool with any power source other than that
specified in the tool operating/safety instructions.
An improperly functioning tool must not
be used.