Publicité
When an air set is not used, oil the tool with ?
pneumatic tool oil by placing 2 (two) or 3
(three) drops into the air fitting. This should
be done before and after use. For proper
lubrication, the too! must be fired a couple of
times after pneumatic tool oil is introduced.
Pour éviter que la pièce ne s'abime ou ne se
raye, fixez le bec adaptateur sur le bras de
contact de façon que la saillie du bec adap-
tateur rentre dans l'orifice du bras de con-
tact.
To prevent the workpiece from being dam-
aged or scratched, attach the nose adapter
to the contact arm so that the protrusion of
. the nose adapter will fit into the hole in the
contact arm.
the storage cavity.
(1) Alvéole de rangement
(1) Storage cavity
Pour changer l'outil
ATTENTION:
Pet gel
Débranchez toujours les tuyau
'i
i
3
l'outil
}
yau
avant d'introduire les clous dans
Always disconnect the hose before loading the nailer.
(1) Levier
(2) Porte coulissante
(1) Lever
(2) Slide door
2i
Publicité
