Dometic SinePower MSI 1812T Instructions De Montage Et De Service page 11

SinePower
The inverter has the following connections, displays and control elements:
I
NOTE
The version for continental Europe is depicted.
Pos. in
fig. 1, page 3
1
2
3
4
5
6
7
Pos. in
fig. 2, page 4
1
2
6 Fastening the inverter
You can fasten the inverter using the four holders supplied.
When selecting the installation location, observe the following instructions:
• The inverter can be mounted horizontally or vertically.
• The inverter must be installed in a place that is protected from moisture.
• The inverter may not be installed in the presence of flammable materials.
• The inverter may not be installed in a dusty environment.
• The place of installation must be well-ventilated. A ventilation system must be
present for installations in small, closed spaces. The minimum clearance around
the inverter must be at least 25 cm.
EN
Element
Switches
0: device is switched off
I: device is switched on
Green Status LED: lights up when inverter is in operation
Red Status LED: indicates malfunction
USB port
MSI412, MSI424 only: Connection for external switch
Cover for 230 Vwsafety socket
Holders
Element
Connection cable for direct current
Fan
Fastening the inverter
11