Setting The Sleep Timer - LENCO CR-740BK Mode D'emploi

5. During playback, press the "CD MODE/DISPLAY" button, it will repeat the current song, display REPEAT
LED will flash. Press the button a second time; It will repeat the whole disc, display REPEAT LED is on.
Press the button a third time; It will play the whole disc random, display RAND. LED is on. Press the button
next; It will cancel repeat/shuffle play.
Programming a CD
1. Press the CLOCK/STOP button to stop the CD, when it's playing.
2. Press the PROG button. "PO1" will show on the display.
3. Press the <<I or I>> buttons to select a track.
4. Press the PROG button to save the selected track to the program. Repeat this step to program up to
20 tracks.
5. When you are finished programming, press the Play/Pause button to play the music in the programmed
order
6. Press the Stop button twice to cancel the program. The PROG Indicator on the display will turn OFF.
FM Radio
1. Turn on the unit and press the SOURCE button to FM mode. Hold the Play/Pause button to automatically
scan and store for FM radio stations. The CR-740BK can store up to 30 presets. Short Press the
PLAY/PAUSE button to increase and select a preset.
2. Hold the <<I or I>> buttons to quickly scan to a desired frequency. Short press these buttons to manually
tune.
3. Hold the PROG button to store the current radio station as a preset. (The next free preset number will be
used).
Short press CD MODE/DISPLAY to switch between FM ST (STEREO) or FM mono. In stereo mode, the
display shows "ST" and then the frequency. In mono mode only the frequency is displayed.
4. To improve radio reception, adjust the wire antenna on the backside of the unit.
Sound Input Function (AUX –In)
Requires a 3.5mm audio cable (not included).
1. The player can play the audio of various sound sources, such as Smartphone, MP3 player etc.
2. With the unit powered ON, insert a 3.5mm audio cable to the AUX-in socket on the rear of the unit. The
unit will automatically switch to AUX mode and "AU" will be shown on the LED display

Setting the Sleep Timer

1. Turn on the unit.
2. Repeatedly press the Sleep button to set the sleep timer (90, 80, 70, 60, 50, 40, 30, 20, 10min or OFF).
3. Once the chosen sleep time has expired the clock radio/CD will automatically power off.
Dimmer
Press the dimmer button to set the display brightness. Normal or bright can be selected.
7