PLAYTIVE HW-9146 Notice D'utilisation page 19

Satellite
To assemble the satellite dish you need compo-
nents 30-35. Assemble the individual compo-
nents as shown in fig. G.
Bridge parts
Assemble the bridge parts as shown in figs. K-M.
The height of the bridge is individually adjusta-
ble.
Assembly options
You will find options for assembly in the en-
closed overview.
Note: In assembly options with many consecu-
tive curved sections, the vehicles could derail!
Clean the rails with a damp cloth before first
use!
Use
Spaceship launch pad (fig. F)
1. Drive the spaceship (39) onto the unfolded
spaceship launch pad up to the end point.
2. Slide the locating pin (28) to the right.
3. Fold the spaceship launch pad together with
the spaceship upwards, and slide the locating
pin to the left. The spaceship is now in the
launch position.
Research vehicle
The drone (36a) and the roof (36b) can be
detached from the research vehicle (36). The
wheels and the door can be folded out and in
(fig. H).
• Remove the protective foil (36c) from the
battery compartment lid (36f) before first use
(fig. I).
• Press the button (36d) to activate or deacti-
vate the underside lighting (fig. I).
Pressing the lighting button
underside
1 x light flashes rapidly
2 x light flashes slowly
3 x light stays on
4 x light switches off
Spaceship
The spaceship (39) can be folded up and it has
a mobile crane (39f) (fig. N).
• Remove the protective foil (39a) from the
battery compartment lid (39d) before first use
(fig. O).
• Press the button (39b) to activate the sound.
Activating and deactivating the
train (fig. R)
• Press the front button (40a) on the train (40)
to activate forward motion.
• Press the middle button (40b) to stop the train
(40).
• Press the rear button (40c) on the train (40) to
activate backward motion.
Warning! The train is not designed to move
backwards on bridges or inclines.
Colour detection technology
When the train (40) travels over a colour panel
it is controlled in accordance with the colour.
There are eight colour panels with four different
colours that can be inserted on straight sections
of track (fig. S).
When the train travels over the follow-
ing colours it reacts accordingly:
Colour Reaction
Purple Train stops briefly
Blue Sound activated
Red Light switches on if previously
off.
Light changes if previously
on.
Green Train changes direction of
travel
GB/IE 19