geo-FENNEL CrossPointer5 SP Mode D'emploi page 17

SWITCHABLE LASER LINES AND LASER DOTS
Power on the instrument (set the ON/OFF switch to ON position).
Press the button laser
lines once to project the
horizontal line.
Press the button laser dots once
to project the right, left and back
dot.
Press the button laser dots again
to switch off all laser dots.
Press the button laser
lines a second time to
project the vertical line.
Press the button laser dots again
to project the top and bottom
dot.
Press the button laser lines
a third time to project both
laser lines.
Press the button laser lines
again to switch all laser
lines off.
Press the button laser dots
once more to project all laser
dots.
Press both buttons („enable laser
dots" and „enable laser lines") to
switch on all available laser lines and
dots.
EN
17