Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
C
OPERATION
Setting up the laser:
1. on the floor
2. connect the laser to the mount supplied with the kit and connect it to a tripod
3. fix the magnets of the mount onto a magnetic surface (steel plate)
4. set up the laser in a hanging position by means of the hole of the mount
5. conncet the laser to a column by means of the fixing strap
POWER ON
Power on the laser by turning the ON/OFF knob in position ON. The instrument is now ready for use. An
audible and optical (blinking lines) alarm indicates if the instrument was set up outside of the compen-
sator range. Set up the instrument on a more even surface.
To power the instrument off turn the ON/OFF knob back to the OFF position. The instrument is now
powered off.
NOTE:
During transport the ON/OFF knob (compensator lock) must be set to OFF . Disregard may lead to dama-
ges of the compensator.
On
Off
16
Publicité
Table des Matières
