Publicité
Les langues disponibles
Les langues disponibles
Instruction for rerouting cables hoses and wiring harness:
Throttle cables (1): Route as original and check throttle cables for free movement on every
steering angle.
Brake hose (2): Mount attached brake hose with new seal rings. Mind the mounting instructions
that are delivered with the brake hose. The bended fittings have to be mounted on the brake
cylinder assy, with the bending leading down. Lay hoses as shown, using the attached cable ties,
hose clamp, washer and bolt M6x12.
————————————————
Rev. 00 10/02/2014
Accessories from
The Original
—
Page 3 of 4
——
Publicité
