HomeMatic IP HmIP-FALMOT-C12 Notice D'installation Et D'emploi page 32

Start-up
7.4.2 Pairing with a Homematic IP
Multi IO Box
If you would like to pair the floor heat-
ing controller with a Homematic IP
Multi IO Box, the pairing mode of both
devices has to be enabled first. To do
this, proceed as follows:
• Briefly press the channel button
(C) as many times until all channels
are shown on the display (B)
figure).
• Press and hold the system button
(A) for 4 seconds until the LED (A)
starts to quickly flash orange
(see figure). The pairing mode is
active for 3 minutes.
The device LED (A) lights up green to
indicate that pairing has been success-
ful.
If pairing failed, the device LED lights
up red. Please try again.
7.4.3 Adding another floor heating
controller
To add a new floor heating controller
to the system or to the existing devic-
es, proceed as follows:
• First pair the new floor heating
controller with the existing floor
heating controller. Enable the pair-
ing mode of the existing floor heat-
ing controller. For this purpose,
press and hold the system button
(A) for at least 4 seconds
figure).
• Enable the pairing mode of the
new floor heating controller. Press
and hold the system button (A) for
at least 4 seconds.
The device LED (A) lights up green to
indicate that pairing has been success-
ful.
If pairing failed, the device LED lights
up red. Please try again.
• You can add the new floor heating
(see
7.4.4
(see
To add your floor heating controller to
the Access Point, proceed as follows:
• Open the Homematic IP app on
controller to other Homematic IP
devices, such as the wall thermo-
stat or the Multi IO Box. Simply
enable the pairing mode of the
floor heating controller first before
enabling the pairing mode of the
device you would like to pair. For
further information, please refer
to the user manual of the corre-
sponding device.
Pairing with the Homematic IP
Access Point
You can connect the device either
to the Homematic IP Access Point
or the Central Control Unit CCU3.
Further information is available in
the Homematic IP User Guide
(available to download in the
Downloads section at
www.homematic-ip.com).
First set up your Homematic IP
Access Point using the
Homematic IP app so that you can
use other Homematic IP devices
in the system. For further informa-
tion, please refer to the Ac-
cess Point operating manual.
your smartphone.
32