HomeMatic IP HmIP-FALMOT-C12 Notice D'installation Et D'emploi page 26

Function and device overview
out. To avoid electric shocks from
the device, please disconnect the
mains voltage (trip the miniature
circuit-breaker). Non-compliance
with the installation instructions
can cause fire or introduce other
hazards.
When connecting to the device
terminals, observe the cables and
cable cross-sections permitted for
this purpose.
The floor heating controller must
exclusively be operated with mo-
torised drives (HmIP-VDMOT).
The device must only be operated
within residential buildings.
Using the device for any purpose
other than that described in this
operating manual does not fall
within the scope of intended use
and will invalidate any warranty or
liability.
4 Function and device
overview
The Homematic IP Floor Heating Con-
troller offers comfortable and de-
mand-based room-by-room control
of your floor heating system using the
smartphone app or the Homematic IP
Wall Thermostat, according to your
personal needs. In conjunction with
motorised drives (HmIP-VDMOT), the
floor heating controller can be used to
control a floor heating system with up
to 12 heating circuits and can be oper-
ated in heating and cooling mode (pro-
vided your heating system supports
this operating mode). You can flexibly
mount the device using the supplied
screws or a DIN rail. The required wir-
ing is kept to a minimum thanks to the
secure radio communication between
the Homematic IP devices.
26