Publicité
Les langues disponibles
Les langues disponibles
• Anti-Crease
This function makes the garments crease less when they are being washed. Rotational movements are decreased
and spin cycle is limited to prevent creasing. In addition to this, washing is done with a higher water level.
• Quick wash / Fast+
When this function is selected, the durations of the relevant programmes get shorter by 50%.
Thanks to the optimised washing steps, high mechanic activity and optimum water consumption, high washing
performance is achieved in spite of the reduced duration.
6.8.2 Functions/Programmes Selected by Pressing the Function Keys for 3 Seconds
• Appliance hygiene / Drum Clean
Press and hold the auxiliary function button 1 for 3 seconds to select the programme. Use regularly (once in every 1-2 months)
to clean the drum and provide the required hygiene. Steam is applied before the programme to soften the residues in the drum.
Operate the programme while the machine is completely empty. To obtain better results, put powder lime-scale remover for
washing machines into the detergent compartment no. „2". When the programme is over, leave the loading door ajar so that the
inside of the machine gets dry.
C
This is not a washing programme. It is a maintenance programme.
Do not run the programme when there is something in the machine. If you try to do so, the machine detects that there is
load inside and aborts the programme.
• Anti-Crease+
This function is selected when the 4th auxiliary function is pressed and held for 3 seconds and the programme
follow-up light for the relevant step turns on. When the function is selected, the drum rotates for up to 8 hours
for preventing the laundry from creasing at the end of the programme. You can cancel the programme and take
your laundry out at any time during the 8-hour duration. Press the function selection key or the machine on/off
key to cancel the function. The programme follow-up light will remain on until the function is canceled or the
step is complete. If the function is not cancelled, it will be active in the subsequent washing cycles as well.
• Child lock
Use Child Lock function to prevent children from tampering with the machine. Thus you can avoid any changes
in a running programme.
C
You can switch on and off the machine with On / Off button when the Child Lock is active. When you switch on the machine
again, programme will resume from where it has stopped.
When the Child Lock is enabled, an audio warning will be given if the buttons are pressed. Audio warning will be canceled if
the buttons are pressed five times consecutively.
To activate the Child Lock:
Press and hold Auxiliary Function button 2 for 3 seconds. After the countdown as "CL 3-2-1" on the
display is over, "CL On" symbol appears on the display. When this warning is displayed, you can release the
Auxiliary Function button 2.
To deactivate the Child Lock:
Press and hold Auxiliary Function button 2 for 3 seconds. After the countdown as "CL 3-2-1" on the
display is over, "CL Off" symbol disappears.
6.9 Delayed Start / End Time
Time display
Remaining time for the completion of the programme while it is running is displayed as "01:30" in hours and
minutes format.
C
Programme time may differ from the values in section "Programme and consumption table" depending on the water pressure, water hardness and
temperature, ambient temperature, amount and the type of laundry, auxiliary functions selected and the changes at the mains voltage.
110 / EN
Washing Machine / User Manual
Publicité
