V-ZUG AdorinaWaschen V400 Mode D'emploi page 108

6.6 Temperature selection
Whenever a new programme is selected, the recommended temperature for the programme appears on the
temperature indicator. It is possible that the recommended temperature value is not the maximum temperature
that can be selected for the current programme.
Press the Temperature Adjustment button to change the temperature. Temperature will decrease by steps
of 10 °C.
Finally, "-" symbol indicating the cold wash option appears on the display.
C
No change can be made in programmes where temperature adjustment is not allowed.
You can also change the temperature after the washing starts. This change can be made if the washing steps
allow it. Changes cannot be made if the steps do not allow it.
C
If you scroll to cold wash option and press Temperature Adjustment button again, the recommended maximum temperature
for the selected programme appears on the display. Press the Temperature Adjustment button again to decrease the
temperature.
6.7 Spin speed selection
Whenever a new programme is selected, the recommended spin speed of the selected programme is
displayed on the Spin Speed indicator.
C
It is possible that the recommended spin speed value is not the maximum spin speed that can be selected for the current
programme.
Press the Spin Speed Adjustment button to change the spin speed. Spin speed decreases gradually.
Then, depending on the model of the product, "Rinse Hold" and "No Spin" options appear on the display.
C
Spin Speed Adjustment button only serves for decreasing the spin speed.
Rinse Hold option is indicated with "ı_ı" symbol and No Spin option is indicated with "_" symbol.
If you are not going to unload your laundry immediately after the programme completes, you can use Rinse
Hold function in order to prevent them from getting wrinkled when there is no water in the machine.
This function holds the laundry in the final rinsing water.
If you want to spin your laundry after the Rinse Hold function:
108 / EN
Washing Machine / User Manual