Hilti NURON VC 2D-22 Notice D'utilisation Originale page 18

3.4 Notes on Hilti Li-ion batteries
Detailed information about Hilti Nuron batteries can be
found at http://qr.hilti.com/manual/?id=2194438.
You can find information about the following topics:
• Safety instructions
• Technical data
• Notes on LED codes
• Handling of Hilti Li-ion batteries
Scan the QR code for the direct route to the
operating instructions.
3.5 Control switch
Status
ECO
MAX
OFF
3.6 Indication of overloading and overheating
The power tool is equipped with an electronic system to protect against overloading and overheating. The
power tool switches itself off automatically in the event of overloading or overheating. The power tool might
not restart immediately after being switched off and then on again at the control switch (cooling phases).
4 Technical data
4.1 Product properties
Weight
Max. volume flow rate
Max. vacuum
Air temperature
Filter cleaning
Rated voltage (DC)
Rated current input
4.2 Noise information
Sound power level (L
WA
Sound pressure level (L
Uncertainty (noise values) (K
4.3 Total vibration
Total vibration
Uncertainty (total vibration)
14 English
Turbine
Hose end
)
)
pA
and K )
pA WA
Meaning
Energy-saving mode
Switching on
Switching off
4.6 kg
(in accordance with EPTA-Procedure 01 without bat-
tery)
35 ℓ/s | 126 m³/h | 74 cfm
23 ℓ/s | 82 m³/h | 49 cfm
11 kPa
−10 ℃ ... 40 ℃
manual
21.6 V
16 A
79 dB(A)
67.2 dB(A)
2 dB(A)
< 2.5 m/s²
1.5 m/s²
2415707
*2415707*