Create Wind Calm Line Mode D'emploi page 13

C H ECK IN STAL L AT I O N
• Check the correct operation of the ceiling fan, checking that no strange movement or mis-
alignment is observed in any part of the fan.
• If you notice any type of hum/vibration, you can proceed to adjust the blades with the bal-
ancing kit.
• This kit has self-adhesive counterweights and "u" shaped clips.
• Turn off the ceiling fan.
• You can put the clip in the center of any blade and check to see if the vibration decreases.
• Turn on the fan and check. If no change is seen, turn off the fan and add another clip on
another blade or use the adhesive weights.
* Only for models with Wi-Fi
The CREATE app is available for both Android and iOS (search for the app on Google Play
or App Store or scan the QR code below). There may be additional costs depending on the
provider.
This device is used through your home network. As an essential requirement, you must have
a Wi-Fi network always connected to your 2.4 Gh router and the free CREATE application.
(Internet providers currently offer both 5Gh and 2.4Gh simultaneously.)
We recommend that you disconnect the appliance from the mains when you are away from
home to prevent it from accidentally starting up while you are away.
iPhone
HOW TO CON N ECT TO T HE APP
1. Install the CREATE app and create a user account.
2. Set a login password and log in to the app.
3. Click "Add Device" (+) and then click the category for the ceiling fan.
4. On the remote control, press and hold the 1H and 4H buttons for about 5 seconds until you
hear a beep.
5. Next, click "Confirm".
6. Enter your Wi-Fi network password and confirm.
7. While connecting, make sure your router, mobile phone and device are as close as possi-
ble. Finally, the ceiling fan will be successfully added to your CREATE application.
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous substances in
electric and electronic equipment as well as their waste disposal. The symbol with the crossed dustbin shown on the
package indicates that the product at the end of its service life shall be collected as separate waste. Therefore, any
products that have reached the end of their useful life must be given to waste disposal centres specialising in separate
collection of waste electrical and electronic equipment, or given back to the retailer at the time of purchasing new sim-
ilar equipment, on a one for one basis. The adequate separate collection for the subsequent start-up of the equipment
sent to be recycled, treated and disposed of in an environmentally compatible way contributes to preventing possible
negative effects on the environment and health and optimises the recycling and reuse of components making up the
apparatus. Abusive disposal of the product by the user involves application of the administrative sanctions according
to the laws.
CONNECTION TO THE APP
Android
E NGLI SH
13