MIRKA LEROS 950 Instructions D'utilisation page 58

en (original)
Declaration of conformity
Mirka Ltd, 66850 Jeppo, Finland
declare under our sole responsibility that the Mirka® products (listed below and see "Technical data" table for particular model) to which
this declaration relates are in conformity with the following standards or other normative documents: EN 62841-1:2015/AC:2015, EN 62841-
2-4:2014/AC:2015, EN 55014-1:2021, EN 55014-2:2021, EN 61000-3-2:2019/A1:2021, EN 61000-3-3:2013/A1:2019/A2:2021, EN 300 328 V2.2.2,
EN 301 489-1 V2.2.3, EN 301 489-17 V3.2.4, EN IEC 63000:2018 in accordance with regulations 2006/42/EC, 2014/53/EU, 2011/65/EU.
®
Products: Mirka LEROS(-S) 950
Jeppo 10.06.2024
Place and date of issue
Original instructions. We reserve the right to make changes to this manual without prior notice.
Important
Read these safety and operating instructions carefully before installing, operating or maintaining this tool. Keep these
instructions in a safe and accessible place. Read and comply with state and local regulations.
Required personal safety equipment
Read
operator's manual
Symbols
Complies with EU relevant standards
Complies with China RoHS requirement
Complies with Australia & New Zealand RCM requirement
Complies with Eurasian conformity requirements
Complies with Serbian conformity requirements
И005 21
Complies with Ukraine conformity requirements
Warning: Potential hazardous situation that may result in death or serious injury and/or property damage.
Caution: Potential hazardous situation that may result in minor or moderate injury and/or property damage.
58
Mirka® LEROS(-S) 950
Company Stefan Sjöberg, CEO
Wear
safety glasses
Manufacturer / Supplier
Mirka Ltd
66850 Jeppo, Finland
Tel. +358 20 760 2111
Fax +358 20 760 2290
www.mirka.com
Wear
ear protection safety gloves
Wear Wear
face mask