Linea 2000 DOMO D-3650 Mode D'emploi page 43

kneading paddle with your hands afterwards. Beware that you only touch the kneading paddle with
your hands if it has sufficiently cooled down. We recommend that you wait 15 to 20 minutes before
cutting the bread.
EXTRA: in case you should not make it home in time, the bread maker will continue to heat the
bread for another 60 minutes. This additional time is not included in the program time.
HOW TO USE THE TIME DELAY FUNCTION
When you want to use the time delay function, you should program it before you press the start
button.
IMPORTANT: never use the time delay function with easily perishable ingredients.
Please carry out the first 8 steps, as described in the chapter "Operating instructions". Next, after
having selected the program and the crust colour of your choice, you press the arrow buttons in order
to adjust (decrease or increase) the time set on the display. Cf. chapter "display".
Example: the time is 9 am and you want your bread to be ready by 5 pm.
• Put all ingredients in the bread pan. Place the bread pan in your bread maker. Close the lid and
select the program and the crust colour of your choice, using the respective buttons. Keep pressing
the button with the arrow pointing up until you see "8.00" on the display. For, evidently, 8 hours
will pass between the time you press the start button and the time you want your bread to be ready
(in this case 5 pm).
• Press the start button. The colon on your display will start to flash and the bread maker will start
the countdown, until it is time for the bread maker to begin the kneading. The bread maker will
let the program run entirely, ensuring the bread will be ready at the desired time.
HOW TO CLEAN YOUR BREADMAKER
Before cleaning your bread maker, please ensure it is no longer activated, it has sufficiently cooled down
and the plug has been disconnected from the power socket.
Exterior
Clean the outside of your appliance and its viewing window with a damp cloth or a sponge. Take
out the bread pan before you start cleaning. If necessary, you can clean the exterior of the appliance
with a mild detergent.
Interior
Gently clean the inside of the appliance with a lightly damp cloth. Be careful when cleaning the
heating element.
Bread Pan
You can clean the bread pan with warm water. Be careful not to damage the non-stick coating. In
case the kneading paddle gets stuck, allow the bread pan to cool down completely. Next, gently pour
a little bit of warm water into the bread pan until the kneading paddle is under water. The sticky bits
will dissolve and you will be able to remove the kneading paddle easily.
Never use cleaning products or dishwashing brushes, for they may damage the non-stick coating of the
bread pan. The bread pan must not be cleaned in the dishwasher.
43
PROLINE B-3650