Publicité
Les langues disponibles
Les langues disponibles
REC
SOLAR03
Irr. F
Irr. BT Irr. BB Tmp/A
[Off]
[Off]
[Off]
SOLAR03
HELP
INFO
STOP RECORDING
5.4. RECORDING VALUES OF PARAMETERS
The remote unit SOLAR03 allows saving in the instrument's internal
memory
the
irradiance/temperature values during a measuring campaign carried
out by the Master instrument to which it was associated.
•
Recording of irradiance/temperature values can
ONLY
associated with the remote unit.
•
The
CANNOT be recalled on the remote unit's display,
but can only be used by the Master instrument, to
which
complete, to save STC values
1.
Associate and connect the remote unit to the Master instrument
via Bluetooth connection (see the Master instrument's user
manual and § 5.2.3). The symbol " " must turn on steadily on the
display.
2. Connect the irradiance and temperature probes to the remote unit,
checking their values beforehand in real time (see § 5.3)
3. Activate the recording of SOLAR03 through the relevant control
available on the associated Master instrument (see the Master
instrument's user manual). The indication "REC" is shown on the
display as indicated in the screen to the side. Recording interval is
[Off]
always 1s (cannot be changed). With this sampling interval it is
possible to carry out recordings with the duration indicated in
section "Memory"
4. Bring the remote unit near the modules and connect the
irradiance/temperature probes. Since SOLAR03 will record all
values with an interval of 1s, the Bluetooth connection with the
MASTER unit is NO longer strictly necessary
5. Once measurements carried out by the Master unit are complete,
bring the remote unit near again, wait for the automatic
connection and stop recording on the Master instrument (see the
relevant user manual). The indication "REC" disappears from the
display of the remote unit. Recording is automatically saved in
the remote unit's memory (see § 5.2.2)
6. At any time it is possible to manually stop the recording of
parameters on the remote unit. Use the arrow keys or , select
control "STOP RECORDING" as shown to the side and press key
SAVE/ENTER. The following screen appears on the display
references
of
the
CAUTION
by
be
started
recorded
values
they
are
sent
38
SOLAR03
recordings
over
the
Master
instrument
of
irradiance/temperature
once
measurements
time
of
are
Publicité
