Publicité
Les langues disponibles
Les langues disponibles
6. Press the standby button
display 6. The red indicator light lights
up. The brewing process will start after
a short time.
7. Let about half of the descaling solution
run through and switch the device off
again by pressing the standby button
twice. The red light goes out.
8. Leave the descaling agent to work for
approx. 30 minutes.
9. Switch on the coffee machine by press-
ing the standby button
cator light lights up. Allow the rest of the
descaling solution to run through.
10.At the end of the brewing process,
switch off the coffee machine by press-
ing the standby button
light goes out.
11.Empty the pot 8 and rinse it with water.
12.Fill the water tank 14 with clear water
up to the 8 cup marking a further
two times and start the brewing process.
10. Storage
DANGER for children!
Keep the device out of the reach of chil-
dren.
1. Clean the permanent filter 2 and rinse
out the filter holder 4 and the pot 8.
2. Leave the cleaned coffee machine and
the cleaned accessories to dry before
you assemble them and put them away.
11. Disposal
on the touch
This product is subject to the
provisions of European Direc-
tive 2012/19/EC. The sym-
bol showing a wheelie bin
crossed through indicates that
the product requires separate refuse collec-
tion in the European Union. This applies to
the product and all accessories marked with
this symbol. Products identified with this sym-
bol may not be discarded with normal
. The red indi-
household waste, but must be taken to a col-
lection point for recycling electric and elec-
tronic appliances.
This recycling symbol marks
e.g. an object or parts of the
twice. The red
material as valuable for recy-
cling. Recycling helps to re-
duce the consumption of raw
materials and protect the environment.
Packaging
When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.
12. Trouble-shooting
If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
No function
DANGER! Risk of electric
shock!
Do not attempt to repair the device your-
self under any circumstances.
Possible causes /
Fault
• Has the device been
connected to the pow-
er supply?
• Check the connection.
actions
35
GB
Publicité
