Publicité
Les langues disponibles
Les langues disponibles
7.4 Touch display
The coffee machine is equipped with a touch
display 6 with the following function buttons:
-
Hours
-
Minutes
-
Standby
-
Aroma selection (normal, strong, ex-
tra strong)
-
Time/Timer (24 h)
Standby mode
To set the time, timer function and/or aroma se-
lection, the device must be in standby mode.
This is the case when you have connected the
device to the mains power supply or the brew-
ing process is completed.
After setting the time, timer and/or aroma se-
lection, the device automatically returns to
standby mode after a short time. You can also
set standby mode manually at any time by
briefly pressing the standby button
touch display 6 three times in succession.
Setting the time
1. When the device is in standby mode,
press the time/timer button
CLOCK appears in the touch display 6.
The time function is activated.
2. To set the time, press the hours button
and the minutes button
time. Select the current time in this way.
3. After a short time, the CLOCK display dis-
appears. The time is saved.
Setting the timer
Using the timer function (adjustable for
24 hours), you can set any time at which the
coffee machine automatically starts the
brewing process.
NOTE: make sure that there is sufficient wa-
ter in the water tank and coffee powder in
the permanent or paper filter.
To set the start time for the timer function, the
current time must have been set previously
and the device must then be in standby
mode again.
1. Press the time/timer
2. To set the time at which the brewing pro-
on the
3. After a short time, the TIMER display goes
4. Then press the standby button
once.
5. When the brewing process starts, the red
quickly at a
6. After the end of the brewing process, the
repeatedly until TIMER appears in the
touch display 6. The timer function is acti-
vated.
cess is supposed to start, press the hours
button
and the minutes button
the touch display 6 at a time.
out. The time you set for the timer has been
saved.
white indicator light appears and CLOCK
appears on the touch display 6. The brew-
ing process starts automatically at the set
time.
LED in the touch display 6 is lit.
hot plate 9 remains active for approx.
30 minutes. It then switches itself off auto-
matically and the red light goes out.
button briefly and
on
twice. A
29
GB
Publicité
