Publicité
Les langues disponibles
Les langues disponibles
Problem
Possible Cause
Saw not mounted
securely to stand or
work bench.
Machine
vibrates
Stand or bench on
excessively.
uneven floor.
Damaged saw
blade.
Mitre scale not
adjusted correctly.
Blade is not square
to fence.
Does not
Blade is not
make accurate
perpendicular to
mitre cuts.
table.
Work piece moving
Kerf plate worn or
damaged.
Material
Cutting bowed
pinches blade.
material.
Z
Protecting the environment
Separate collection. Products and batteries marked
with this symbol must not be disposed of with normal
household waste.
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
Voltage
Speed
Blade outer diameter
Bore diameter
Blade max. kerf
Weight without battery
Blade thickness
Mitre (max. positions)
Bevel (max. positions)
horizontal
0 deg. mitre
vertical
horizontal
45 deg. mitre right
vertical
horizontal
45 deg. mitre left
vertical
horizontal
45 deg. bevel left
vertical
Solution
Tighten all mounting hardware.
Refer to Bench Mounting
Reposition on flat level surface.
Replace blade. Refer to Changing
or Installing a New Saw Blade.
Check and adjust. Refer to Mitre
Scale Adjustment under
Adjustments.
Check and adjust. Refer to Mitre
Scale Adjustment under
Adjustments.
Check and adjust fence. Refer to
Bevel Square to Table Adjustment
under Adjustments.
Clamp work piece securely to fence
or glue 120 grit sandpaper to fence
with rubber cement.
Take to authorised service centre.
Refer to Bowed Material under
Special Cuts.
SFMCS701 (H1)
V
18
/min
3800
mm
190
mm
16
mm
1.8
kg
10
mm
1.0
°
47
°
47
mm
50 x 216
mm
90 x 15
mm
50 x 152
mm
90 x 15
mm
50 x 152
mm
90 x 15
mm
50 x 152
mm
50 x 15
(Original instructions)
SFMCB201
Battery
18
Voltage
V
DC
1.5
Capacity
Ah
Kg
0.4
Weight
Li-Ion
Type
Charger
SFMCB11
Input Voltage
V
AC
Output Voltage
V
DC
Current
A
Level of sound pressure according to EN 62841:
L
(sound pressure) 83.0 dB(A), Uncertainty (K) 3 dB(A)
pA
L
(sound power) 94.5 dB(A), Uncertainty (K) 3 dB(A)
WA
%
EC declaration of conformity
MACHINERY DIRECTIVE
SFMCS701 Sliding Compound Mitre Saw
Stanley Europe declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN62841-1:2015+A11:2022,
EN IEC 62841-3-9:2020 + A11:2020
These products also comply with Directive
2014/30/EU and 2011/65/EU.
For more information, please contact STANLEY FATMAX at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
STANLEY FATMAX.
Patrick Diepenbach
General Manager, Benelux, GTS-Europe
STANLEY FATMAX Europe,
Egide Walschaertsstraat 14-18
2800 Mechelen, Belgium
28.04.2023
ENGLISH
SFMCB202
SFMCB204
SFMCB206
18
18
2.0
4.0
0.4
0.6
Li-Ion
Li-Ion
SFMCB12
SFMCB14
230
230
18
18
1.25
2
18
6.0
0.9
Li-Ion
230
18
4
21
Publicité
