Phonak Roger EasyPen Guide D'installation Rapide page 16

Masquer les pouces Voir aussi pour Roger EasyPen:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Protect all openings (microphones, audio input and charger) from dirt and
debris.
If the device has been dropped or damaged, if it overheats during charging,
has a damaged cord or plug, or has been dropped into liquid, stop using
your device and contact your hearing care professional.
The device has a built-in rechargeable battery. This battery can be charged
and discharged hundreds of times but may eventually wear out. The battery
may then only be replaced by authorized personnel.
1.3 Other important information
ƒ Persons with pacemakers or other medical devices should ALWAYS consult
their physician or the manufacturer of their device BEFORE using the device.
The use of the device with a pacemaker or other medical devices should
ALWAYS be in accordance with the safety recommendations of the physician
responsible for your pacemaker or the pacemaker manufacturer.
ƒ Device collects and stores internal technical data. This data may be read by a
hearing care professional in order to check the device, as well as to help you
use your device correctly.
ƒ The digital signal sent from the device to a connected receiver cannot be
overheard by other devices which are not in the microphone's network.
2 Declaration of Conformity
In body worn operation, the devices have been found in compliance with the
requirements of EN 62209-2, FCC rule paragraph 2.1093, the ANSI/IEEE
C95.1:1999, the NCRP Report Number 86 for uncontrolled environment, accord-
ing to the Health Canada's Safety Code 6 and the Industry Canada Radio Stan-
dards Specification RSS-102 for General Population/Uncontrolled exposure.
Hereby, Phonak Communications AG, Länggasse 17, CH-3280 Murten, declares
that these Phonak products are in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC. To obtain a copy of the
4

Publicité

Table des Matières
loading

Table des Matières