Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
In order to avoid causing personal injury to any third parties who may be present, the operator must make sure that
nobody is within 15 meters of the machine before activating it.
Always use a protective visor when operating the machine.
This label outlines all of the machine's potential hazards. It can be found upon the machine in a visible location.
ATTENTION!!! The machine is equipped with an extremely powerful cutting element. Always keep your hands and feet at
a safe distance from this element and never perform any operations upon the machine while the motor is running.
It is recommended to never use the machine in the presence of gravel, small rocks and/or foreign objects. Such elements
could be projected by the cutting wires and pose an extreme danger to anyone or anything in the machine's vicinity. Keep
people at least 30 meters away from the machine while it is in function. The operator must wear a protective face shield
and rubber boots while operating the machine.
ATTENTION!!! The machine's swing‐action mechanism represents a serious crushing hazard to the fingers. Keep your
hands away from it at all costs.
Note
IT IS EXTREMELY IMPORTANT THAT THESE REGULATIONS BE RESPECTED!
THEIR APPLICATION SERVES TO PREVENT SERIOUS PERSONAL INJURY OR PROPERTY DAMAGE, AS WELL AS TO ENSURE AN
ADEQUATE LEVEL OF OPERATOR SAFETY.
MACHINE IDENTIFICATION PLATE AND CE MARKING
10
Publicité
Table des Matières
