Measuring - TESTO 417 Mode D'emploi

6.

Measuring

This chapter describes the steps that are required to
perform measurements with the product.
➣
Taking a measurement:
✓
The instrument is switched on and is in measurement
view.
❯
Put the probe in position and read off the readings.
➣
Changing the measurement channel display:
❯ To change between displaying the temperature (°C, °F)
and the calculated volumetric flow rate (m
Press
➣
Holding the reading, displaying the maximum/minimum
value:
The current reading can be recorded. The maximum and
minimum values (since the instrument was last switched
on) can be displayed.
❯ Press
displayed.
- The following are displayed in turn:
· Hold: the recorded reading
· Max: Maximum value
· Min: Minimum value
· The current reading
➣
Resetting the maximum/minimum values:
The maximum/minimum values of all channels can be
reset to the current reading.
Press
1
Press and hold
2
- All maximum or minimum values are reset to the
info@Testo-Direct.com
current reading.
.
several times until the desired value is
several times until Max or Min lights up.
(approx. 2s).
Testo-Direct
www.
6. Measuring 27
3
/h, l/s, cfm):
1.888.475.5235
.com