R&G CP0494 Instructions De Montage page 6

Page 6 of 16
• If not already fitted, fit a bubble sticker into recess of the crash protector cap.
• Fit the remaining crash protector cap into the crash protector, so the assembly resembles
that in picture 4.
• Before riding, check both sides are secure, and the crash protectors cannot rotate.
• Check tightness of each side regularly.
The catalogue description and any exhibition of samples are only broad indications of the Products and R&G may make
design changes which do not diminish their performance or visual appeal and supplying them in such state shall conform
to the order. The Buyer acknowledges no representation or warranty (other than as to title) has been given or will apply
to the Products other than those in R&G's order or confirmation and the Buyer confirms it has chosen the Products as
being of merchantable quality and suitable for its particular purposes. Where R&G fits the Products or undertakes other
services it shall exercise reasonable skill and care and rectify any fault free of charge unless the workmanship has been
disturbed. The Buyer is responsible for ensuring that the warranty on the motorcycle is not affected by the fitting of the
Products. On return of any defective Products R&G shall at its option either supply a replacement or refund the purchase
money but shall not be liable if the Products have been modified or used or maintained otherwise than in accordance
with R&G's or manufacturer's instructions and good engineering practice or if the defect arises from accident or neglect.
Other than identified above and subject to R&G not limiting its liability for causing death and personal injury, it shall not
be liable for indirect or consequential loss and otherwise its liability shall be limited to the amounts paid by the Buyer for
the Products or the fitting or service concerned. These terms do not affect the Buyer's statutory rights.
Returns must be pre-authorised (if not pre-authorised the return will be rejected). Goods may only be returned direct to
us if they were purchased direct from us (customer must prove if necessary).
vendor. Goods must be in re-sellable condition, in the opinion of R&G. All returns are subject to a 25% restocking and
handling fee (25% of the gross value exc. P&P – at the prevailing price at time of purchase). The customer must pay
any and all carriage charges. No returns of discontinued products, unless within 14 days of purchase. This policy does
not affect your statutory rights and does not refer to faulty goods.
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com
ISSUE 1 - 31/07/2020 (DM)
CONSUMER NOTICE
R&G RETURNS POLICY (NON-FAULTY GOODS)
R&G
CP0494
Otherwise to be returned to original